Hexagonal Nets / Fencing Net / Parameter Fencing

One of the most prominent way for enhancing the beauty of your Gardens & Parks is to install HEXAGONAL NET manufactured under the trademark of 'PLASTINET' by ARD POLYPACKS PVT. LTD., at Panchkula (HARYANA). It not only adds to the beauty and attraction of your parks & gardens but has other advantages as well. It is anticorrosive, see through and helps avoid damage to your garden by animals and children. Just a sprinkle of water on Hexagonal Net once a week while watering your garden, makes it absolutely NEW.

It also reduces the hassle of painting and maintenance.

Installation Method For Hexagonal Net in Your Garden...

1. Dig pits of 45cm X 45cm and 50 cm deep at an interval of maximum 2 metres at the place where you want to install the Hexagonal Net.

2. Grout angle iron sections 50 X 50 X 6-1700mm long with drilled holes, as shown in the sketch no 1, 40 cm deep in these pits, keeping the top hole to the angle iron at one level.

3. Give an additional support angle at each end and at turnings.

4. Paint the poles with enamelled paint of leaf green colour.

5. Tie up a leaf green colour PVC coated galvanised wire of 10 gauge at the top and bottom hole by cotter pins.

6. Grip the joint of Hexagonal Net. at the top and bottom holes of the starting pole by the cotter pins used for tying wires and repeat this procedure at the next pole at the top and bottom.

7. Now, tie up every third top joint of the Hexagonal Net. by a piece of leaf green coloured PVC coated galvanised wire or by staple, used for gripping car seat covers, on the top and bottom joints of Hexagonal Net. upto the second pole, refer sketch no 2.

8. Repeat the procedure no. 5 & 6 for successive poles in succession only.

9. Your fencing is ready now.